Technical data

CD Control
Re:source
12
General operation
If a CD Control module is installed, the
sources
Aux-1, Aux-2, Aux-3 and CD
appear in the Source menu of the
Re:system M51 and M10 devices.
In a Multiroom system, the new sources
have to be assigned to the
corresponding remote buttons in the
Remote menu, so that they can be
called up in the side room.
You will find a description of the Remote
menu in the Re:system Device Startup
Guide.
The picture below shows the M51
Source menu. The display is designed in
a similar way for the various Revox
Apps. The display and control options in
the side room through the M217/M218
display/keypad combination are
described in a later chapter on Page 14.
The corresponding source is called up
by pressing the
Aux-1, Aux-2 Aux-3 or
CD softkeys.
CD Menu
After the CD source has been selected,
Loading appears in the display,
assuming that the Blu-ray player was
not already switched on. The Blu-ray
player reads the CD in during this
phase.
Play starts after this. With a newly
inserted CD, play starts from Track 01. If
the CD had already been played, play
restarts from the position where it was
last stopped -
Resume function.
If you want play to start from Track 1
and not use the
Resume function, call
the Stop function twice.
The display headline shows whether it
is an audio CD
[CD] or a video disc
[Video].