Technical data

CD Control
Re:source
10
Analogue input IN1 IN2 IN3
Connect the three analogue inputs IN1 – IN3 using a cinch stereo cable with
your external device. The inputs are shown in the source menu as Aux-1 –
Aux-3.

The analogue inputs IN1 – IN3 are
not
suitable for connecting a record deck.
In this case, you should use the I/O module, which supports both MM and MC
sound systems. Both modules, the CD Control module and the I/O module, can
be used together in the M51/ M10.
Alternatively, an external Phono pre-amp can be used that transmits its Line
signal to one of the three auxiliary inputs on the CD Control module.