Technical data

CD Control
Re:source
8
Configuring the digital input
You can now select whether and which
of the 5.1 decoder digital inputs should
receive the digital signal, using the
Dig.
Input function.
Dig. Input: Not Assigned
No digital input is being used. Audio
reproduction for the main room is done
using the analogue input
IN4, in the same
way as with the side rooms.
Dig. Input: Optical
Audio reproduction for the main room is
done using the 5.1 decoder module
Optical input.
Dig. Input: Coaxial (1/2)
Audio reproduction for the main room is
done using the 5.1 decoder module
Coaxial input.

The 5.1 decoder module MK3 has 2
coaxial inputs,
Coaxial 1 and Coaxial 2.
Hiding analogue inputs
On the second page of the Setup (Menu
softkey), the CD Control module offers
the option of hiding the
Aux-1, Aux-2
and
Aux-3 analogue sources, if
required.
This option is only available in the CD
source Setup menu - [Source CD >
Setup > Source]. You can only modify
the source names in the Setup menu of
the individual Aux inputs [Source Aux 1,
2, 3 > Setup > Source].
The hidden source(s) no longer appear
in the Source menu and are no longer
available on the remote control.
By repeated pressing of the Aux-1/Aux-
2/Aux-3 softkeys, the corresponding
analogue sources can be hidden
[Off] and
revealed
[On].