Technical data

CD Control
Re:source
7
SETUP CD-CONTROL
The basic settings for the CD Control
module are made in Setup.
Select the source CD from the Source
menu and press and hold the Setup key
for approx. 2 seconds. Then select the
Source softkey. The following display
appears:
Configuring the digital input
When installing the CD Control module
in a Re:system M51 or M10 with an
installed 5.1 Decoder module, you have
the option to use the digital audio signal
from the CD Player in the main room. In
this case, the digital output (Coaxial/
Optical) is connected to the digital input
on the 5.1 decoder module at the M51.
This has the advantage that in the case
of spatial sound programmes, there is
no need for any additional, sound-
reducing DA or AD conversion.
The side rooms continue to be supplied
with the analogue audio signal through
the IN4 input.
.
Main room cabling: 5.1 Decoder module with the CD Player