Technical data

CD Control
Re:source
14
CD CONTROL
A) Multiroom Operation
You can operate the CD function of the
CD Player from each side room, with
the Revox Multiroom System. If the
M217 wall-mounted display is installed,
the track number and the status are
displayed.
Multiroom configuration
The wall-mounted display shown below is
showing the CD menu. The user can
choose which button is used to call the
CD menu. The choice is made between
the wall-mounted display source buttons:
TUNER, CD, SERVER, AUX2. The Local
button can also call Multiroom sources
directly, from software version 2.02 of the
M218 wall-mounted keypad.
The button assignment is made through
the Remote menu. See Chapter:
M51/M10
Introduction
Change/display track
Using the two buttons  (shown
with black/white squares) on the wall-
mounted operating panel, you can
switch within the CD to the previous or
the next track.
With an activated IR receiver (shown
as dark) in the wall operating panel, all
control commands that the M208
Remote control makes available with
the "Revox Joy CD player" configuration
can be used – see chapter
Remote
control
.