Technical data

CD Control
Re:source
12
GENERAL OPERATION
If a CD Control module is installed, the
sources
Aux-1, Aux-2, Aux-3 and CD
appear in the
Source menu of the
Re:system M51 and M10 devices.
In a Multiroom system, the new sources
have to be assigned top the
corresponding remote buttons in the
Remote menu, so that they can be
called up in the side room.
You will find a description of the Remote
menu in the Re:system device Startup
Guide.
The picture below shows the M51
Source menu. The display is designed in
a similar way for the various Revox
Apps. The display and control options in
the side room through the M217/M218
display/keypad combination are
described in a later chapter on Page 14.
The corresponding source is called up
by pressing the
Aux-1, Aux-2 Aux-3 or
CD softkeys.
CD Menu
After the CD source has been selected,
the
Reading display appears, assuming
that the CD Player was not already
switched on. The CD Player reads the
CD in during this phase.
The read-in content of the CD is now
displayed in the List view. In the case of
CDs without CD text, the display
appears as a numbered track list.
If the CD has CD text, the individual
track names are listed.