Technical data

Communication SAT Re:source
7
Setup IN1 IN2 IN3
Edit source name
The display names of the three
inputs IN1 – IN3 can be freely
defined. You no longer have to
remember which external device
is connected to which input. You
can simply give each input a
name that makes the assignment
obvious.
Select the input from the
SOURCE menu whose name
you want to edit.
This is possible with:
Aux-1, Aux-2, Aux-3
The edit function is called by
pressing the Setup key for
about 2 seconds and then
selecting the softkey Source.
The following display appears:
By selecting the softkey Edit
Name, you will get to the source
name edit function.
(see next chapter)
Edit function
By selecting the Edit Name
softkey, you get to the menu
shown below.
The Õ Cursor Ö softkey moves
the [ ] cursor left and right.
The Delete softkey deletes a
character where the [ ] cursor is
positioned.
The Insert softkey inserts a
character to the left of the [ ]
cursor.
The Store softkey saves the
currently display name and
returns you to the Setup menu.
The Cancel softkey leads back
to the Source Main menu
without saving any changes
made.