Technical data

Communication SAT Re:source
5
Connection panel
L IN R
Comm.
1
2
3
4
RS 232
RS232 connection
The RS232 communication
interface is connected to the
RS232 interface on the Topfield
receiver with a 9-pin Sub-D
cable ( 1:1 connection; plug –
socket). More details on this are
to be found in the chapter
Cabling.
Audio connections
The Communicate module has 4
independent audio inputs:
IN 1 for Aux-1
IN 2 for Aux-2
IN 3 for Aux-3
IN 4 for SAT
Devices such as external
tuners, CD players, MiniDisc
players or cassette decks (Play)
can be connected to the
analogue line inputs IN1 to IN3.
A special feature of these three
inputs is that they can each
have different level settings and
name assignment.
The input IN4 is used to
connect to the audio output
from the Topfield receiver.
You will find information
about the corresponding
cabling in the next chapter.
L Module name / number
From January 2009, all SAT
Communication Modules will be
supplied with a new back wall label.
This now carries the label SAT
Module and has the part number:
1.551.085.02.
The SAT software can be updated
on both module versions because
the hardware is the same.