Technical data

Communication SAT Re:source
3
Communicate
Module
The Communicate module is a
universal audio interface with a
serial communication port.
The Communicate module with
the SAT software is described in
this manual.
This software supports the PVR
Series of Receivers from the
Topfield company, that are
receivers with integrated hard
disk. The receiver type can
equally well be a satellite (S) or a
cable (C) receiver as well as a
terrestrial receiver (T).
 TF 5000 PVR (S)
 TF 5000 PVR Masterpiece (S)
 TF 5500 PVR (S)
 TF 6000 PVR (S; WLAN)
 TF 6000 PVRE (S; Ethernet LAN)
 TF 5000 PVRt (T)
 TF 5200 PVR (C)
A basic pre-requirement is that
the Topfield receiver is equipped
with the special display.tap
software from Revox and that
this is installed in the Program
Files / Auto Start folder.
The display.tap file and the
corresponding installing manual
can be found at www.revox.com
If the Topfield receiver is inte-
grated into the Revox world
through the Communicate
module, the receiver basic
functions can be carried out at
the M51 and from every
Additional room. Additionally, the
corresponding displays show the
names of the TV and radio
channels as well as an overview
list.
A further feature are the 3
additional analogue inputs
available in the SAT version of
the Communicate module.