Technical data

Communication SAT Re:source
15
General operation
The Communicate module’s
inputs Aux-1, Aux-2 and Aux-3
are automatically displayed with
the installed SAT software.
The individual inputs are called
through the Source menu.
Press
the Source button on the M51
when it is switched on. The
following menu field appears:
The corresponding analogue
source is selected by pressing
the Aux-1, Aux-2 or Aux-3
softkeys.
You start the SAT menu with
the SAT softkey.
If the required source is not
shown on the first SOURCE
page, simply scroll to the next
page with the More softkey.
L
The receiver must be switched
on permanently so that the
Communicate module can
access it at al times.
SAT menu
After you have selected the SAT
source, the TV or Radio menu
appears.
The decision as to whether TV or
Radio is displayed depends on
the Setup setting and the last
source selection.
The current TV or Radio station
name is shown in the middle of
the display.
Using the Radio or TV softkey,
you can choose your desired
source.
L
With the Topfield receiver, you can
receive radio programs as well as TV
programs.