Technical data

Communication SAT Re:source
14
Configuring the digital input
You can now select whether and
which of the 5.1 decoder digital
inputs should receive the digital
signal, using the Dig. Input
function.
Dig.Input: Not Assigned
No digital input is used. Audio
reproduction for the main room is
done using the analogue input IN4,
in the same way as with the
additional rooms.
Dig.Input: Optical
Audio reproduction for the main
room is done using the 5.1
decoder module Optical input.
Dig.Input: Coaxial (1/2)
Audio reproduction for the main
room is done using the 5.1
decoder module Coaxial input.
L
The 5.1 decoder module MK3 has
2 coaxial inputs, Coaxial 1 and
Coaxial 2.
Suppressing analogue inputs
The Communicate module offers
you the option of suppressing the
analogue sources Aux-1, Aux-2
and Aux-3 as required.
The suppressed source(s) no
longer appear in the M51 Source
menu and are no longer available
on the remote control.
By repeated pressing of the Aux-
1/Aux-2/Aux-3 softkeys, the
corresponding analogue sources
can be suppressed and released.