Technical data

Communication SAT Re:source
12
SAT Setup
The basic settings for the
Communicate module are made
in Setup.
Select the source SAT from the
Source menu and press and
hold the Setup key for approx. 2
seconds. Then select the Source
softkey. The following display
appears:
TV channel lock
There is the locking function TV
Lock for use in Multiroom
operation.
With this function, you can
secure a TV program that is
running in the Main room
against being changed from one
of the Additional rooms. If TV
Lock is activated, i.e. On, the
TV channel can only changed
from the Main room. People in
the Additional room can only
select the source, not change it.
Exception
If another source is used in the
Main room or if the Main room
is in standby.
If the function is deactivated, i.e.
Off, anybody can change the
TV channels, whether from the
Main room or from an Additional
room.
You can toggle between On and
Off by repeatedly pressing the
TV Lock softkey.