Technical data

Communication SAT Re:source
10
Level adjustment
The Communicate module
offers the option from the
professional studio world of
being able to adjust the
individual inputs in relation to
each other. In this way, for
example, a quieter CD player
can be set to a higher level so
that there is no need to adjust
volume levels when you switch
between sources.
You should proceed as follows
for this function.
Select the Aux source from the
SOURCE menu whose level
you want to adjust. This is
possible with: Aux-1, Aux-2,
Aux-3
This function is called by
pressing the Setup key for
about 2 seconds and then
selecting the softkey Source.
The following menu appears
with the Level Offset display in
the middle.
If you want to raise or lower the
level of this source, press the
softkeys –Level or Level+
respectively. In this way, the level
can be changed by ± 10 dB.
The modification can be heard
during the input. The repro-
duction will get louder or softer
correspondingly.
If the settings are correct, there
shouldn’t be any more volume
difference between the adjusted
analogue sources and, for
example, the M51 tuner.
If this is not the case, carry out
the level adjustment again.
Once the levels meet your
requirements, you can leave the
Level function with the Source
or the Amplifier key.