Technical data

Communication SAT Re:source
9
Restore standard name
If you want to restore a modified
source name to the standard
factory setting name, select
these Aux source from the
SOURCE menu.
This is possible with:
Aux-1, Aux-2, Aux-3
Select the Edit Name function
in the Setup menu.
The standard name can be
restored by deleting the
modified name completely using
the Delete key as shown in the
display below.
When you save using the Store
softkey, the factory setting is
restored.
This takes you back to the
Setup Menu.
The standard name is now
restored as shown in our
example with Aux-1.