Technical data

Kaleidescape
Re:source
32
Movie Player replay
A) with the M51 [5.1 Decoder]
The Movie Player control is simply
started by calling the digital audio
source (coaxial or optical) at the
M51. Now, using the M208 remote
control, you can search for your
film through the Kaleidescape OSD
menu.
To do this, you must ensure that the
corresponding television with the
correct video input is switched on at
the same time. This can be
accomplished very easily with an
M203 interface, for Revox, Pioneer
or Loewe devices.
Using the M51 Setup Remote menu,
please link the remote button Local
with one of the digital inputs, Optical
or Coaxial. This ensures that the
Movie Player can be operated over
several rooms and, irrespective of
whether you operate the Movie
Player through the M51 or from an
Additional room, you can always use
the same remote control.
Fig. M51 Setup Remote menu
You will find information about the
cabling of the Movie Player on page
12.
Additional information
In theory, you could also make an
analogue connection between the
Movie Player and the M51 using the
Cinch output. However, this
connection doesn’t support the 5.1
Sound audio format, which would
allow you to control 6 Home Cinema
speakers, giving you a room-filling,
cinema sound.
To give you a better overview, you
should rename the 5.1 Decoder
module’s digital input Coaxial or
Optical as Movie, for example. This
is possible with the MK2 or MK3
5.1 Decoder module.
Fig. M51 Source display