Technical data

Kaleidescape
Re:source
17
p Movie Player serial number
As a Movie Player is only installed
in rooms from a Revox Multiroom
system where there is also a
television or beamer, the
Kaleidescape module has to be
told which these rooms are.
Here, the serial numbers of the
individual Movie Players are
entered in the zone/room fields,
where they are installed.
You start with the Main room. You
can select the zone with the
and softkeys and
the room with the
and
softkeys. The room softkeys only
appear when selecting Zones 1 –
4.
Now enter the S/N of the
corresponding Movie-Players
as shown in the above
example. Rooms where no
Movie Player is installed are
identified by 00000000.
Only one Movie Player can be
entered per room.
Save your set values with the
Softkey Store. Otherwise, your
settings will not be applied.
The corresponding S/N can be
found on the back of the devices or
in the Kaleidescape player menu.
The S/N can be read out from the
menu with a Web browser. Also
refer to the chapter: Kaleidescape
player setup.
Only the last 8 characters of the
serial number are shown in the
Kaleidescape module setup, even
if the original serial number is
longer.
Important advice
L
The Kaleidescape system always
has to be switched on, so that the
Revox Multiroom system can
access the Communicate module
at any time.