Technical data

Kaleidescape
Re:source
15
n Identification number
If several Music Players are to be
operated in the Kaleidescape
system, an assignment must be
made through the identification
(device) number to identify which
Music Player is communicating
with the Kaleidescape module. The
Revox system can only
communicate with one Music
Player. All further Music Players
must be operated manually and
cannot be integrated in the Revox
Multiroom system.
The setting range is between 1 and
99. The identification number is set
using the two softkeys
and .
Save your setting values with the
Softkey Store. Otherwise, your
settings will not be applied.
You will find detailed information
on the topic of Music Players in the
chapter Setup menu ~
COMPONENTS, on page 9.
n Music Player serial numbers
The Revox system recognises the
Music Player as well as the
individual Movie Players through
the serial number (S/N) (Setup p).
The corresponding S/N are to be
found in the Kaleidescape Player
Setup menu and can be read out
using a Web browser.
For this reason, you should be
aware of the corresponding S/N
before starting to commission the
Kaleidescape system or better still,
carry out the commissioning
together with the Kaleidescape
agent/dealer.
As part of this, you can then define
the output formats for audio and
video for the corresponding Movie
Players together.
The serial number (S/N) is set
using the
and softkeys
together with the setting wheel.
Save your setting values with the
Softkey Store. Otherwise, your
settings will not be applied.