Technical data

Kaleidescape
Re:source
13
Kaleidescape module
setup
The basic settings for the
Kaleidescape module are made in
Setup.
Select the source Server from the
Source menu and press and hold
the Setup key for approx. 2 sec..
Then select the Source softkey.
The following display appears:
All settings needed for
commissioning the Kaleidescape
system are carried out on the
three Setup pages.
Important advice
The serial numbers of the individual
Music and Movie Player are
needed for setup. For this reason,
Revox recommends that the
settings are carried out together
with the Kaleidescape
agent/dealer who, if necessary,
can read the required data out.
n Remote Routing
Remote Routing defines which
address will be used for sending
the Kaleidescape system
commands. To ensure correct
operation, the selected setting
must be the same as that in the
M51 Remote menu and in the mpi
file in the M208 Remote control.
You can choose from the
addresses shown in the graphic.
You can make your choice from
an endless loop using the
softkeys
and
Save your setting values with the
Softkey Store. Otherwise, your
settings will not be applied.
The selection mirrors the 4 source
keys from the M218 Remote
control, which as result can be used
for a direct call of the Kaleidescape
system.
Aux1/ Serve
r
Aux2
Tuner
DVD/CD
Disabled