Technical data

Multiroom Module 03
Re:source
5
Connections
ZONE
There are 4 connections with RJ45
connectors for the four zones, on the
rear of the Multiroom module.
Depending on the scope of the
Multiroom installation, up to 8 Revox
Additional room amplifiers can be
connected to a zone.
Connection is made using an
uncrossed, double-screened CAT7
patch cable, with am RJ45 plug.
Further information’s regarding the
cabling of the multiroom-system can
be found on last pages of this manual.
IR SEND
Using the IR Send socket, you can
control the basic functions of third-party
devices, such as video recorders, from
all the Additional rooms.
However, you can only control devices
that Revox has listed in IR Link Menu /
Code.
You will find further information from
Page 29.