Technical data

Multiroom Module 03
Re:source
30
IR Link operation
With the Revox Multiroom System, the
operation of the third-party devices,
e.g. DAB Tuner, which are controlled
through the IR Send output, is done
exclusively through the M208 Remote
control. For this purpose, load the
corresponding device from the M208
Project Manager database (see figure,
below right) onto the M208. In the
"Source Select" field, select the remote
control button that you want to link to
the audio input in the Remote Menu
(M51/M10).
Example:
An Argon DAB+ Tuner is to be
controlled through the
IR Send 2
output. Its audio output is to be
connected over an optical TOS Link
cable with the
Optical input on the
M51 5.1 Decoder module.
Setting: Multiroom Setup
Setting: M51 Remote Menu
Explanation of the example:
The DAB Menu is called through the
TUNER button on the M208 Remote
control (M208 Project Manager). At
the same time, the
Optical source is
activated through the
Aux 3 remote
button. Now, the Argon DAB Tuner
can be switched on and controlled
with the M208. The sound is supplied
in the main room through the optical
input, Optical.
 Note: The digital inputs from a 5.1
Decoder module can only be heard in
the main room, not in a Multiroom
System side room. Use the analogue
inputs from an I/O (Tuner) module to
supply sound to the side rooms.
Setting: Project in the M208 Project Manager