Technical data

Multiroom Module 03
Re:source
28
IR Link
Using the Revox Multiroom System IR
Link, you can control the basic functions
of third-party devices, such as video
recorders, from all the Additional rooms.
However, you can only control devices
that Revox has listed in IR Link Menu /
Code.
You use the M208remote control unit IR
Link
menu. This sends out an RC-5 code,
which is then converted to the third-
party device code in the Multiroom
module. The signal is transmitted using
an IR Transmitter (Revox
recommendation; XANTECH Model
283M), which is installed on the IR eye of
the third-party device.
The following commands are
transmitted:
 Play
 Stop
 Pause
 Fast Forward & Rewind
 Track Forward & Rewind
0-9 10-key keypad incl.
The ON/OFF command cannot be
supported. These devices have to be
switched on and off manually.