Technical data

Multiroom Module 03
Re:source
27
Clear all timers
Using the Clear Timer function, you
can delete all timers at the same time
and return them to their factory
settings. This is particularly useful
after competing installation, if the
different timers have been setup for
test purposes.
The function is called through the
Option menu in the Multiroom- Setup.
Press and hold the Clear Timer softkey
for about 5 seconds until you return to
the Multiroom menu.
Now, all the maximum 132 timers have
been cleared and returned to their
factory settings.
Active rooms
The Multiroom module offers you the
option of showing all active rooms in
the display. This gives you a quick
overview of which rooms are in which
zone.
This setting is particularly helpful
during installation. But also on a
regular basis, it is often useful to have
a quick overview of the setup.
This function is called through the
Multiroom menu, by pressing the
Softkey
Menu.
If several additional rooms are active,
these are shown in the display with
their corresponding zone. The four
columns represent the four zones.
In the above example, the following
rooms are active:
Zone : Room 4
Zone : Room 1 + 2 + 5
Zone : no active rooms
Zone : Room 1 + 4