Technical data

Multiroom Module 03
Re:source
26
Hotel mode
The Hotel mode allows you to
customise the additional room switch-
off function.
Function review:
The Off key in the additional room
triggers the following functions:
Short press
Switch off additional room
2-second press
Switch off the corresponding zone
5-second press
Switch off complete system
The function is called through the
Setup / Multiroom menu. By pressing
the
Menu softkey, you get to the
second page, where if you press the
Menu softkey, the following display
appears:
Repeated pressing of the Hotel Mode
softkey toggles the function on and off.
If the M10/ M51 is installed in a hotel
or a public building, it is usually
not
desired that someone listening in an
additional room can switch the
complete system off. Hotel mode
offers you the option of limiting the
switch off function to the additional
room and its zone.
If the Hotel mode is activated,
switching off the complete system is
no longer possible.
The Hotel mode has no effect on the
off switch on the M51/ M10 itself. As
before, the complete system can be
switched off by pressing the switch for
a longer time.