Technical data

Multiroom Module 03
Re:source
24
Restore standard name
If you want to return the name of an
additional room to its factory setting,
select the room in question with the
softkeys
Zone and Select.
Now press the softkey Edit Name, to
get to the editing menu.
The standard name is restored, by
deleting the name entered manually
using the softkey
Delete, as shown
below:
When you now press the softkey
Store, the factory setting is restored.
In our example, this would be
Room 26.
Scan function
This function carries out a query of all
the rooms in a zone, which recognises
how many rooms are actually
connected. If an additional room has
logged on and is therefore physically
available, this is shown by a star *.
This function is primarily designed for
use during the installation and
checking of additional rooms. It is not
a function that is generally needed in
day-to-day operation.
You can carry out this function, for
example, after new components have
been installed or if you need to check
on settings after the initial installation.
It can take a few seconds after you
activate the Scan function, before the
information is displayed.