Technical data

Multiroom Module 03
Re:source
21
Multiroom setup
The Multiroom setup offers you a
wealth of information about the
available and/or active additional
rooms, for example, the software
version of the multiroom products that
are connected. In addition, you can
assign names to the additional rooms,
which make the system even simpler
to use.
The Multiroom function is called
through the Setup menu, by pressing
and holding the Setup button for a
couple of seconds, the following
display appears:
Press the Multiroom softkey to call the
Multiroom menu and the following
display appears:
Select zone
Using the two softkeys
and
, you can select the zone that
contains the room(s) you want to
modify or check. You can scroll
forwards through zones 1-4 with
and backwards with .
Select room
Using the two softkeys
and
you can choose the room
where you want to make the
modification.
Using
, you can move down
the list and with
, you can
move up the list.