Technical data

Multiroom Module 03
Re:source
15
Volume setting
Once the weekday has been selected,
the next time you carry out
Select,
you can select the volume to be used.
[
]
Using the rotary control knob, you set
the volume level from
1, very low, to 9,
very loud, in an endless loop.

Volume control can be carried out
through the
Test function. Please refer
to the Chapter:
Test function
Select Timer source
Using the Multiroom module timer, you
can select one of three sources to be
activated, namely
Tuner, DVD/CD and
Aux/Server.
Please note
When you are selecting the source,
you must remember that the actual
source that will be selected is that
which is assigned to the Tuner,
DVD/CD and Aux/Server through the
Remote menu.
If instead of DVD (Fig. ), Aux-1 (Fig.
) is assigned to the DVD button, the
Timer will switch
Aux-1 on.
In this way, this function can be used
to call-up particular external sources
through the Timer function.
You must ensure that the external
source (e.g. AUX1) is also active when
the Timer calls it.

[ ]
Volume 1
Volume 2
:
:
:
Volume 8
Volume 9