Technical data

Multiroom Module 03
Re:source
13
Switching time setting
First you define the Switch on time and
then the
Switch off time. As shown
below, in each case you enter the
hours value followed by the minutes
value.
Switch-on Switch-off
| |
Hours Minutes |
| | |
[6]:[30] – [7]:[15]
Tips !
If you choose a timepoint for the
Switch off time which is smaller than
the Switch on time, e.g.
20:15 – 08:30 the Timer will switch on
at 8:15 pm in the evening and off at
8:30 am the following morning.
Weekday selection
Once you have defined the on and off
times, you get to the next input field,
the Weekday when the Timer should
be activated by pressing the
Select
softkey again.
[ ]
Using the rotary control knob, you can
set to the required weekday.
As well as the individual days from
Monday to Sunday, there are certain
day groups you can choose from.
The individual week days are
represented by the following letters:
M  Monday
T  Tuesday
W  Wednesday
T  Thursday
F  Friday
S  Saturday
S  Sunday