Technical data

Multiroom Module 03
Re:source
12
Select
Using the two softkeys

Select, you can define the
properties of the individual timers.
The selection of Switching times,
Weekday, Volume and Source is
achieved using the two softkeys

Select
You can move in any direction, moving
backwards or forwards as you want.
This type of selection option appears
in the display between two square
brackets
[...].
The manual highlights this additionally
in the individual sections, with the
following symbol:
 [ ]
Switching time setting
When an Timer is selected, the 
Select  softkeys are used to set the
switching times.
The first time you press the Select
key, the first number pair appears in
square brackets.
 [ ]
As soon as the Switch on or Switch off
time is changed, the Timer activates
itself automatically. This is shown in
the display by a change from
(Off) to
(On).
You can use the  Select softkeys
to change between the various input
fields in any direction.
Switch on time [Hours]
Switch on time [Minutes]
Switch off time [Hours]
Switch off time [Minutes]
Weekday [ ... ]
Volume [ ... ]
(Tuner station) [ ... ]