Owner`s manual

• Audio settings r'.,'..",iii%'i'l",'2."i:::'*'i"
Use this feature to adjust the overall audio settings of this
unit.
• HDMI set E)i..ii::,Mi :!!!;i!!T
Use this feature to select the component to play back
HDMI audio signals.
1',,',==1!T,, _ ¢ ==_=T
+ HUTE "r','F'E" =FLILL
I:1_[,Ei. P,' ...... Ct_/:_
TONE B','F'I_::-Sd:JLIT0
SLIPF'O[_IT I:llJ[:,D3_
R:,',-ij 1"7%1
Muting type _.,.iirr T_.i,':::"i",..,i:::,_:::'
Use this feature to adjust how nmch the mute function
reduces the output volume (see page 41).
Choices: FULL, 20dB
• Select "FULL" to completely mute all the audio
output.
• Select " 2()dB" to reduce the current volume by 20 dB.
Audio delay ,...,,...,,...*.............,....,....,...,,
Use this feature to delay the sound output and synchronize
it with the video image. This may be necessary when
using certain LCD monitors or projectors.
Control range: 0 to 240 ms
Control step: 1 ms
Tone bypass *'r'"=H"ii:::'iD_..iiD,",,::_',:::'
Use this feature to select whether the audio output
bypasses the tone control circuitry when "TREBLE" and
"BASS" are set to 0 dB (see page 50).
Choices: AUTO, OFF
• Select "AUTO" if you want the signals to bypass the
tone control circuitry to provide the purest signal
possible.
• Select "OFF" if you do not want the signals to bypass
the tone control circuitry.
Support audio Si.jI:::'F:'(.')I:;I:]"l::ii...ii)iO
Use to select whether to play hack HDMI audio signals on
this unit or on another HDMI component connected to the
HDMI OUT jack on the rear panel of this unit.
Choices: RX-V1700, OTHER
• Select "RX-V 1700" to play back HDMI audio signals
on this unit. The HDMI audio signals input at the
HDMI IN jacks of this unit are not output to the HDMI
component connected to the HDMI OUT.jack on the
rear panel of this unit.
• Select "OTHER" to play back HDMI audio signals on
another HDMI component connected to the HDMI
OUT jack.
The HDM1 xideo signals input at the HDMI IN 1 or HDMI 1N 2
jack ol this unit are always o[ltpl.ttat the HDMI OUT jack ol this
unit.
93 En