Owner`s manual

_l_.'_[llJ_lFJl_[l'lllll,.tll;llllrlJ_f_,1_llfz11_."t,_llll_
• "CENTER", "SUR. L", "SUR. R", "SB L", "SB R", "SWFR",
"PRNS L" and "PRNS R" cannot be adjLtsted if "CENTER SP"
{see page 88), "SUR. L/R SP" (see page 88), "SUR. B L/R SP"
{see page 89), "LFE/BASS OUT" (see page 87) aod
"PRESENCE SP" (see page 89) are set to "NONE"
respectively.
• Instead of "SB L" and "SB R", "SB" is displayed if "SUR. B L/
R SP" is set to either "SMLxI" or "LRGxI" (see page 89).
• Testtone [:,)FEST TONE
Turns the test tone output on or off for the SPEAKEP,
SET, SP LEVEL and SP DISTANCE settings.
Choices: ON, OFF
If you use a handheld sound pressure level meter, hold at arm's
length and point upwards so that the meter is in the listening
position. With the meter set to the 70 dB scale and to C SLOW,
calibrate each speaker to 75 dB.
• This function is automatically turned off if you exit "BASIC
MENU".
• If you select "ON" and enter the "SPEAKER SET", "SP
LEVEL" or "SP DISTANCE" menu, the test tone is output from
tlre selected speakers.
Use to manually adjust speaker settings or compensate for
video signal processing delays when using LCD monitors
or projectors. Most of the SOUND MENU parameters are
set automatically when you run AUTO SETUP (see
page 32).
£ .....................
+ i_) Eg!LIgL IZER
B)LFE LEVEL
C:)D','lqfllli C: RFIHL_E
D)I%IDI 0 SET
[,&] ['_"]_ UF '[/c,wn
[EHTER ]_En+.er
+ E)HE:q'li SET
[.,},3["_3_ LII:g,,::,_.Jl-i
[ EMTER ] _ Er,(eJ ....
• Equalizer A::,i!!!QLiI::iL:i:;;!!:iER
Use this feature to select the parametric equalizer or the
graphic equalize1:
Equalizer select SELECF
Use this feature to select the type of equalizer.
Choices: AUTO PEQ, GEl:l, EQ OFF
SELECT ....... GEG!
[ 4 ] { } ] : gd iust
[ EHTER ] =EnteJ ....
• Select "AUTO PEQ" to use the parametric equalizer
adjusted in "AUTO SETUP" (see page 32).
• Select "GEQ" to adjust the built-in 7-frequency band
graphic equalizer so that the tonal quality of the
speaker matches. Press ENTER to display the graphic
equalizer screen.
• Select "EQ OFF" to deactivate the equalizing feature.
You can select "AUTO PEQ" only _hen )c u car O cut "AUTO
SETUP" in advance (see page 32). In this case, "AUTO PEQ" is
automatically selected as the delault setting.
91 En