Owner`s manual

Surro nd back speakers ,:?i:::, i ,<<i:::, ,::?iD
U ....'I,,,_ I,,,,," I',, ,,,._I
Choices: NONE, SMLxl, SMLx2, LRGxl, LRGx2
DD L,"F, DF
61qL::Q >:5HL x2
• Select "NONE" (none) if you did not connect surround
back speakers. The surround back channel signals are
directed to the surround left and right speakers.
• Select "SMLx 1" (small x 1) if you have a small
surround back speaker that does not reproduce low-
frequency signals effectively. The low-frequency
signals of the surround back left and right channels are
directed to the speakers selected in "'LEE/BASS OUT"
and the rest of the signals are directed to the surround
back left speaker.
• Select "SMLx2" (small x 2) if you have two small
surround back speakers that do not reproduce low-
frequency signals effectively. The low-frequency
signals of the surround back left and right channels are
directed to the speakers selected in "LFE/BASS OUT".
• Select "LRGx 1" (large x 1) if you have a large
surround back speaker that reproduces h)w-frequency
signals effectively. All the surround back left and right
channel signals are directed to the surround back left
speakm:
• Select "LRGx2" (large x 2) if you have two large
surround back speakers that reproduce low-frequency
signals effectively. All the surround back left and right
channel signals are directed to the surround back left
and right speakers.
Presence speakers {:::'i:?.E:!!!:ENCE:!!;1:::'
Use this feature if you want to use the presence speakers
connected to this unit.
Choices: NONE, YES
ri.,=i_===_=LIF,_= i=ri
_.I401tE ',IE:_
• Select "NONE" (none) if you did not connect presence
speakers.
• Select"YES" (yes) if you connected presence speakers
and want to use them.
Bass cross over ,-.i:::,,...,,.::,:::i'°ii ii:::'i:::,
'...<I '..'...' ...._...._ '..._<v'L..I '><
Use this feature to select the crossover frequency of all the
speakers set to "SML" (or "SMALL") or to "NONE" in
"SPEAKER SET" (see pages 87 and 89). All frequencies
beh)w the selected frequency will be sent to the subwoofer
or to the speakers set to "LRG" (or "LARGE") in
"SPEAKER SET" (see pages 87 and 89).
Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz,
120Hz, 160Hz, 200Hz
lUl=l = I1==11
FREg!= = =8$Hz
Subwoofer phase :!!;i..Ji!!:UI::)OF'I!![F?.F:'Hl:i:!!!;l!!:
Use this feature to switch the phase of your subwoofer if"
bass sounds are lacking or uncleal:
Choices: NORMAL, REVERSE
==iIF! I=%=iFFFi F,! I=%=F
D.E,....Fr_i. FNN.:,I.
>IIORHIL REHERSE
• Select "NORMAL" if you do not want to reverse the
phase of your subwoofm:
• Select "REVERSE" to reverse the phase of your
subwoofm:
Presence/Surround back channel priority
i:::'Ri (:)Ri P,"
Use this feature to prioritize either the presence or the
surround back speakers when playing sources that contain
surround back channel signals using the CINEMA DSP
sound field programs.
Choices: PRNS, SB
FiFi,,=F Fi? TI i
Fi,'L!I," i7
F'RH6 >5B
• Select "PRNS" to use the presence speakers even when
surround back channel signals are input. The signals
for the surround back channel will be output from the
surround speakers.
• Select "SB" to use the surround back speakers when
surround back channel signals are detected in a
CINEMA DSP program. The presence channel signals
are output from the front speakers.
89 En