Owner`s manual

• Sound field parameter descriptions

YOUcan adjust the values of certain digital sound field parameters sc, that the sound fields are recreated accurately in your

listening room. Not all of the following parameters are found in every program.

_.,#.

To change som_d lield parameter settings to suit your listening enx ironment, see page 76 lor details.

i%_:::'i::) i _1::'i ii_i

TMT"i" r'.,i irj

i::l T M T "i" i"d _.J

1 ==._. I "I .I. I =_I.='I... 1

,_? T M T "i" i"d _.J

_ii."iiii_ _i_i_i'i _ i_._i _i

DSP le',el. Adjusts the level ol all the DSP ellect sounds v,itbin a narrow range. Depending on

the acoustics ol your listening room, you lllay \_ant Io increase or decrease the DSP ellect le',el

relative to the lexel ol the direct sound.

Control range: 6 dB to +3 dB

Initial delay. Presence, surround, and surround back initial delay. Changes the apparent distance

from the source sound by adjusting the delay between tbe direct sound and the first reflection

heard by tbe listener. The smaller the value, the closer the sound source seems to the listener. The

larger the value, the farther it seems. For a small room, set to a small value. For a larp,e room, set

to a large value.

Control range: 1 to 99 ms (INIT.DLY and R1N1T.DLY)

1 to 49 ms (S.INIT.DLY and SB lNl.DLY)

Ti_;_le

Delay

I _ ()l_'nd Sol_'rCe

F Reflection litce

.=4

Small *,alue = I ms

Source sound

k ''/

I _ Early

reflections

Tirne

Delay

Large *,alue = 99 t;_ls

77 En