Owner`s manual

(U.S.A. model)
1 3
(U.S.A. model)
Rotate the INPUT selector on the front panel
(or set the operation mode selector to
SOURCE and then press XM on the remote
control) to select "XM" as the input source.
The cursor on the left of the XM indicator lights up in
the front panel display.
Front panel
Check the XM Satellite Radio reception level
and ad ust the orientation of XM Passport
System for a better percentage of the
reception level.
"4<--
Vo{lcan display the XM Satellite Radio reception level by
using the "XM ANTENNA" parameter in "OPTION
MENU" (see page 100).
Notes
• If "CHECK ANTENNA" appears in the fl'ont panel
display, XM Passport System may not be connected to the
XMjack on the rear panel of this unit properly. See
"Connecting the XM Passport System" on page 61 and
check the connection.
• The "XM ANTENNA" parameter in "OPTION MENU"
(see page 100) cannot be adjusted by using the remote
conlroh Instead, you need to adjust the orientation of XM
Passport System connected to the XMjack of this unit lot
a beucr percentage of the reception level.
3 Press PRESET/TUNING/CH <]/_> on the
front panel (or PRESET/CH A / V on the
remote control) to select channel "0".
_aES_H
Front panel Remote control
or
At!
S0UP_E
Remote control
Lights up
You cannot select channel "0" if the All Channel Search
mode (see page 66) is not selected.
Check the XM Satellite Radio ID number
displayed in the front panel display and write
it down.
ID:
64 En