Owner`s manual

IRliV.1_:_pf,
This unit comes with a variety of input jacks. Use this
feature (Audio input .jack select) to switch the input jack
assigned to an input source when more than one .jacks are
assigned to an input source.
-#.
• We recommend setting Audio input jack select u_ "AUTO" in
most cases.
• You can adjust the default Audio input jack select of this unit by
using "AUDIO SELECT" in "OPTION MENU" (see page 99).
Rotate the INPUT selector on the front panel
(or press one of the input selector buttons on
the remote control) to select the desired
input source.
INPUT
or
000%
Front panel Remote control
Press AUDIO SELECT on the front panel (or
AUDIO SEL on the remote control) repeatedly
to select the desired Audio input jack select
setting.
AUD_ AUDIO SEL
SE_CT
% or %
Available input sources
i::i,,:iii:iiii:L.:: i::iUT07
Currently selected
Audio input jack
select setting
i'_ii"r'l%
iii....ii._.
i=._'11"1=..,_ ..._"li::) ....
¢"_M _"d _"ff:::
Automatically selects input signals in
the following order:
( 1) HDMI
(2) Digital signals
(3) Analog signals
Selects only HDMI signals. When
HDMI signals are not input, no sound
is output.
Automatically selects input signals in
the following order:
(1) Digital signals input at the
COAXIAL jack.
(2) Digital signals input at the
OPTICAL jack.
When no signals are input, no sound is
output.
Selects only analog signals. If no
analog signals are input, no sound is
output.
Note
This lbature is not available when no digital input jack
(OPTICAL, COAXIAL and HDMI) are assigned. In
addition, HDMI is not available as an Audio input jack
select setting when the HDMl IN 1 and HDMI IN 2jacks
are not used. Use "l/O ASSIGNMENT" in "INPUT
MENU" to reassign the respective input jack (see page 94).
40 En