Owner`s manual

Start playback on the selected source
component or select a broadcast station.
• Refer to the operating instructitms for the source
component.
• See page 54 for details about tuning instructions.
• See page 65 for details about XM Satellite Radio
tuning instructions.
Rotate VOLUME on the front panel (or press
VOLUME +/- on the remote control) to adjust
the volume to the desired output level.
Front panel Remote control
See page 51 to adjust the level of each speaker.
Rotate the PROGRAM selector on the front
panel (or press one of the sound field
program selector buttons on the remote
control repeatedly) to select the desired
sound field program.
The name of the selected sound field program appears
in the front panel display and in the OSD. See
page 45 for details about sound field programs.
PROGRAM Q_
Front panel Remote control
)
Currently selected sound field program category
I
H0 LJi i::
:iii;,::.:i.-l:: :i.
I
Currently selected sound field program
Sound field programs and the Compressed Music Enhancer
mode cannot be selected when the component connected to
the MULTI CH INPUT jacks is selected as the input source
(see page 41) arid Audio input jack select is set to
"ANALOG" (see page 40).
--'4_'--
• Choose a sound field program based on your listening
preference, not merely on the name of the program.
• When yOLIselect an input source, this unit automatically
selects the last sound field progrmn used with the
corresponding input source.
• To display information about the currently selected input
source in the OSD, see page 76 for details.
• Guideto contents
See
When you want to...
page
Enjoy pure hi-fi stereo sound 50
Adjust the tonal quality ol the front speakers 50
Enjoy the compressed music sources in enhanced 52
sound
Edit parameters of sound field programs 76
Ei_joythe sources which have wide dynamic range at 53
night
Use headphones 4 I
Enjoy multi-channel sources in 2-channel stereo 5I
Select a decoder to play back sources with 80
Set this unit to the standby mode automatically 43
39 En