Owner`s manual

I_IWiIPi-'i_lq'
Volume level i F:UF:I
Checks and adjusts the vohune level of each speaker.
Choices: CHECK, SKIP
• Select "CHECK" to automatically check and adjust
this item.
• Select "SKIP" to skip this item and perform no
adjustments.
Press _7to select "START" and then press
ENTER to start the setup procedure.
This unit starts the auto setup procedure. Loud test
tones are output from each speaker during the auto
setup procedure. Once all items are set, the
"RESULT:EXIT" display appears in the OSD.
PRESETI_H PRESET/_.
@-@
A A
• During the auto setup procedure, do not perlorm any
operation on this unit.
• Wc recommend getting out of the room while this unit is in
the aLttosetup procedure. It takes approximately 3 minutes
for this unit to complete the auto setup procedure.
The display changes as follows.
SETUP, ...... gUTO
k_IRiHG ..... CHEC:K
D ISTPMC:E... CHECK
SIZE ....... CHEC:K
Eg!....... 14rITLIIRPL
LEUEL. ..... C:HEL-,K
÷ STPRT
[ A] s'[_'] ; UF DONIq
,.,_ i=ji,Tpi ==,111%=,i/
4 MJ,.=°,Ng°o,
I NI TI gL IZ 11'115
÷ FIRE C:HEC:K
Hgllq CHECK
Eg!LIPLiZ II_J_
LEUEL
CHECK CH=C:EHTER
iIill .........
L,_,]_ Exit
Rr::_L]L.,D"=..
÷ RESLILT
SP _ 5,'4/C_.1
DiST_ Id._?i 17.CIft
LUL _ .-9.¢/ +6.SdEl
>SET C:gNC:EL
I,,_,] ['_*]_ Ur_ '])own
I EIq] ER] _Enter
The results displayed under "RESULT" are as
follows.
Number of speakers :!!!;l:::'
Displays the number of speakers connected to this
unit in the following order:
Front/Back/Subwoofer
Speaker distance i) :[:!!!;]
Displays the speaker distance from the listening
position in the following order:
Closest speaker distance/Farthest speaker distance
Speaker level l....i.)l....
Displays the speaker output level in the following
order:
Lowest speaker output level/Highest speaker output
level
• If "E-10:INTERNAL ERROR" appears during the testing
procedure, restart fl-om step 4.
• If you selected "RELOAD" in step 4, no test tones arc
output.
• If an error occurs during the "AUTO:CHECK" procedure,
the setup procedure is canceled and an error screen
appem's. For details, see "If an error screen appears" on
page 36.
• When this unit detects potcnfal problems during the
"AUTO SETUP" procedure, "WARNING" and the
number of warning messages appears in the above of
"RESUUF' (see page 37).
• Depending on the listening environment, "SWFR
PHASE:REV" appears during the "AUTO:CHECK"
procedure and "SUBWOOFER PHASE" in "SOUND
MENU" (see page 89) is antomatically set to
"REVERSE".
34 En