Owner`s manual

|_om,,,=f,*iroig_
• Connecting audio components
• To make a digital connection to a component other than the delhult component assigned to each the DIGITAL INPUT jack or the
DIGITAL OUTPUT jack, select the corresponding setting lor "OPTICAL OUT", "OPTICAL IN", or "COAXIAL IN" in "110
ASSIGNMENT" (see page 94).
• Connect your turntable to the GND terminal of this unit to reduce noise in the signal. However, you may hear less noise without the
connection to the GND terminal lor some tm'ntables.
• The PHONO jacks arc only compatible with a turntable with an MM or a high-output MC cartridge. To connect a turntable with a low-
output MC cartridge to the PHONO jacks, use an in-line boosting transformer or an MC-head amplifier.
• When you connect both the DIGITAL INPUT (OPTICAL)jack and the DIGITAL INPUT (COAXIAL)jack to an audio component,
the priority is given to the DIGITAL INPUT (COAXIAL)jack.
Audio out _ Optical in
CD recorder
Ground I
1
Turntable
kudio i Coaxial I Optical
CD player
(U.S.A. model)
r
Audk) _Audio 1
out _in
) optic_l in
MD recorder or
tape deck
24 En