Owner`s manual

Connect your TV (or projector) to the HDMI OUT ,jack, the COMPONENT VIDEO MONITOR OUT ,jacks, the S
VIDEO MONITOR OUT jack or the VIDEO MONITOR OUT jack of this unit.
Do not connect this unit or other components to the AC power supply until all connections between
components are complete.
_-'#-
Youcan select to play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUT jack on tbe
rear panel of this unit. Use the "SUPPOKF AUDIO" parameter in "SOUND MENU" to select the component to play back HDMI audio
signals (see page 93).
Noto
• Some video monitors connected to this unit via a DVI connection fail to recognize the HDMI audio/video signals being input if they
are in the standby mode. In this case, the HDMI indicator flashes irregularly.
• Set "V CONV." in "OPTION MENU" to "ON" (see page 97) to display the short message display arid parameter displays.
• Set "GRAY BACK" in "OPTION MENU" to "ON" (see page 97) to display the parameter displays.
• The SET MENU and parameter displays appear with the gray backgrom]d depending on the input video signal lormat and the setting
of the parameters in "DISPLAY SET" (see page 97).
T
,onent *,ideo_J [Video in
_ in [..___J _ in
IV
(or projector)
(U.S.A. model)
indicates recommended connections
indicates alternative connections
21 En