Owner`s manual

Some of the speakers have speaker wire connections that
allow bi-amplification to enhance the performance of the
speaker system. This unit alh)ws you to make bi-
amplification connection to one speaker system. Check if
your speakers support bi-amplification. As these speakers
m'e shipped to you, you will note shorting bars or bridges,
one connecting the two red input terminals and the other
connecting the two black input terminals. Remove these
shorting bars or bridges only if you plan to bi-amplify
your speakers.
• Conventional connection
If you want to connect your speakers as traditional
loudspeakers using the conventional connection method,
connect your speakers using the regular left and right
speaker wire connections and ignore the second set of
terminal s.
Right Left
Front speakers
Shorting bars
or bridges
Shorting bars
or bridges
• Bi-amplification connection
To make the bi-amplification connections, use the t_RONT
and SURROUND BACK terminals as shown beh)w. To
activate the bi-amplification connections, set "BI-AMP"
to "ON" in "ADVANCED SETUP" (see page 119).
This unit ]
Right Left
Front speakers
Remove the shorting bars or bridges to separate the LPF (low
pass filter) and HPP"(high pass filter) crossovers.
17En