Owner`s manual

Use this feature to reset all the parameters of this unit to the initial factory settings.
• This procedure completely resets allthe parameters of this unit includingthe "SET MENU" parameters. However,the advanced setup
menu parameters will not be initialized.
• The initial lhctory settings are activated next time you turn on this unit.
_-'#-
Tocancel the initialization procedure at any time without making any changes, press MASTER ON/OFF on the front panel to release it
O[tt_ ard R) the OFF position.
(U.S.A.model) 3 Rotate the PROGRAM selector on the front
panel to select "PRESET".
1-2,5 3 2,4
Press MASTER ON/OFF on the front panel to
release it outward to the OFF position to turn
off this unit.
Press and hold STRAIGHT on the front panel
and then press MASTER ON/OFF inward to
the ON position to turn on this unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
i i ="" r" n r: r: r" ="" r" "T"
L,_.D i:::.f::. f" f::.i:::..D i:::.{
i.J DJ { i"J
4 Press STRAIGHT on the front panel
repeatedly to select "RESET".
_rRA_O_T
While holding
down
SrRA_OUT_ _ _
i _ ="" r" r": r: r: r" ="" r" "r"
L._.D iZ f::. f" f::.ilZ.D iZ {
!;.:!...i:ii:!...iT
Select "CANCEL" to cancel the initialization procedure
without making any changes.
5 Press MASTER ON/OFF on the front panel to
release it outward to the OFF position to
confirm your selection and turn off this unit.
130 En