Owner`s manual

4 Press the numeric buttons to enter the
four-digit remote control code for the input
area you want to use.
CLASSICAL LIWCLOB EUTERTAlU MOVIE
STEREO _UR 0EC_E"',]'
TO SOR.
q9 O O <9
(9 ®LI
Remote control tuner codes
Select one of the following codes to set the remote control
tuner code for the input area you want to use.
2602 To operate this unit using tile IDt
(initial setting) deiautt code. (initial setting)
2603 To operate this unit using an 1I-)2
ahernati*, e code.
Remote control XM codes
Select one of the following codes to set the remote control
XM code for the input area you want to use.
il'_l'/ih'l'tq'i-'l:i iq
Press ENTER to set the number.
"OK" appears in the display window if setting was
successful.
"NG" appears in the display window if the setting
was unsuccessful. In this case, start over from step 1.
Press LEARN again to exit from the setup
mode.
Ld.
2604 To operate this unit using the IDt
(initial setting) deiautt code. (initial setting)
2605 To operate this unit using an 11-)2
ahernati*, e code.
You need to set the corresponding remote control tuner ]D
or XM lD (see page 118).
121 En