Owner`s manual

E_ohtIl_o]Ui.'f-_f;l_I_#/;[_ifol;l.:.
This section describes the function of each control on the
Zone 2/Zone 3 remote control used to control the amplifier
functions of Zone 2 or Zone 3.
See the following pages for details about other controls
and functions.
• AM/FM tuning ........................................ see page 54
• XM Satellite Radio tuning ...................... see page 62
@ Input selector buttons
Select the desired input source of Zone 2 or Zone 3.
@ IDI/ID2 switch
Switches the remote control ID between IDI and ID2
(see page 104).
@ POWER
Turns on Zone 2 or Zone 3.
Zone 2/Zone 3 remote control is supplied with U.S.A., Canada,
Australia, U.K., China, Asia and General models only.
@--
@--
VOLUME
ZO,E_ZO,Ea
(U.S.A. model)
..............................@
_(6)
This button is operational only when MASTER ON/OFF on fire
ITontpanel is pressed inward to tile ON position.
@ STANDBY
Sets Zone 2 or Zone 3 to the standby mode.
This button is operational only when MASTER ON/OFF on fire
ITontpanel is pressed inward to fireON position.
@ VOLUME +I-
Increases or decreases the volume level of Zone 2 or
Zone 3.
@ MUTE
Mutes the sound of Zone 2 or Zone 3. Press again to
restore the audio output to the previous volume level.
@ ZONE 2/ZONE 3 switch
Switches between the operation mode of Zone 2 and that
of Zone 3.
SEn