Owner`s manual

This unit allows you to configure a multi-room attdio system. The multi-zone configuration feature enables you to set this
unit to reproduce separate input sources in the main room, second room (Zone 2) and tbird room (Zone 3). YOUcan
conD'ol tbis unit fl'om tbe second or tbird room using tbe supplied remote control.
Only, analog signals are sent to the second and third rooms. Any source you want to listen to in the second or tbird
room must be connected using tbe analog (AUDIO L/R) input jacks on this unit.
You need the following additional equipment to use the multi-room functions of this unit:
• An infrared signal receiver in the second and/or third room.
• An infrared emitter in the main room. This emitter transmits the infrared signals fi'om the remote control in the second
and/or third room to the main room (to a CD player or DVD player, for example).
• An amplifier and speakers for the second and/or third room.
-#.
• You do not need an exn'a amplifier and speakers for the second and/or third roomif you want to use the internal amplifiers of this unit.
• Since there arc manypossible ways to connect and [lsethis unit in a multi-room configuration, we recommend that you consult with
your nearest authorized YAMAHAdealer or service center for the Zone 2 and Zone 3 connections that best meet your requirements.
REMOTE REMOTE REMOTE REMOTE
IN_ IOUT IN_O.UT ..... ,,_
Infrared signal This unit YAMAHA YAMAHA
receiver component component
AUDIOIN--I It-- ........
lnii'aredemitter '.................................................
_' Main room
(Mainzone)
REMOTE OUT
+
Amplifier
Ret;lote control
lnfl'ared signal
recei_er
Second room
(Zone2)
REMOTE IN
Ac_ptilier
Remote control
lnlrared signal
recei_er
Third room
(Zone 3)
REMOTE IN
• Adjust the Zone 2/Zone 3 volmne by using the amplilier in the second/third roomwhen "ZONE2 VOL"or "ZONE3 VOL" are setto
"FIX" (see page 99).
• "111axoid unexpected noise, DO NOT use the Zone 2/Zone 3 leature x_ithCDs encoded in DTS.
113E,