Owner`s manual

• Programming macro operations
You can program your own macro and use the macro
programming feature to transmit several remote control
commands in sequence at the press of a button. Be sure to
set up remote control codes or perform learning operations
before programming the macro.
• The default macro is not cleared when a new macro is
programmed for a button. The delS_ult macro can be used again
when the programmed macro is cleared.
• It is not possible to add a new signal (macro step) to the delS_ult
macro. Programming a macro changes all macro contents.
• Wc do not recommend programming continuoLts operations
such as volume control in a lnacro.
Set the operation mode selector to AMP or
SOURCE and then press MACRO using a
ballpoint pen or similar object.
"MCR ?" appears in the display window on the
remote control.
_CE
&
or _ _(_
TV
©
11you do not complete each ol the lollowing steps within 30
seconds, the macro programming mode will be
aLllomatically canceled. In this case, start o',er h'om step 1.
Press the macro button you want to use to
operate the macro.
The macro button name (ex. "M;DVD") and the
selected component name (ex. "DVD") appear
alternately in the display window on the remote
control.
5o
PHONOQ_ Q_TUNER _ FALILTICHINQ_
V-AUX/DGCK CBLISAT _ID/r_E CD-R
OO(DO
(U.S.A,model)
m{_J._'i I?a!IR
Dkl'.l
if:_l_,lI_l,.;,ll,iIiple;l:r_wIw*:l:_
Note
"AGAIN" appears in the display _indow il you press a
button other than a lllacro button.
Press the buttons for the functions you want
to include in the macro operation in
sequence.
You can set up to 10 steps (10 functions). After you
have set 10 steps, "FULL" appears and the remote
control automatically exits the macro mode. The
folh)wing example is for programming the following
procedure:
Step 1("MCR 1"): Press DVD.
Step 2 ("MCR 2"): Press AV POWER.
Step 3 ("MCR 3"): Press SLEEP.
(U.S.A.model
MCR 2: AV POWER
MCR 3: SLEEP
MCR 1: DVD
Indicates the
_, number of macro
steps entered
gil I_ i/'_t
iJ. i_
I Flashes alternately so you can
set the next step
To change the selected input area, press SELECT A / V.
Pressing the input selector bretons wilt program a macro step,
v\hereas SELE( T A / V only changes the selected input area.
Press MACRO again using a ballpoint pen or
similar object when the operation sequence
you want to program is complete.
"ERI_,OR'' appears in the display window il you press more
than one button silnuhaneously.
109 En