Owner`s manual

• Default macro functions
Pressing
macro button
D
<5
PNONO
C)
TUNER
C)
©
_ULTICH
c)
V-_a_DOCK
C)
CetvSA'_
C)
MccrAPE
C)
CD-R
c)
VCR 1
C)
ov_JvcR 2
C)
©
To automatically transmit these signals in order
First Second Third
(*I)
(*I)
..... ('=2)
{5
c5
PHONO
(D
•u.E. ('3)
C)
©
NULT]C_ IN
(D
V-AW,_OCK
C)
cetvs_r
C)
MOrrAPE
C)
CD-R
c)
VCR1
(D
ov_JvcR 2
C)
©
((D area) ('=4)
(MD/TAPE area) ('4)
((D-R area) (*4)
(VCR I area) ('4)
E_ (DVR/VCR 2 area) ('4)
(DVD area) ('4)
*1You can turn on some components (including YAMAHA components) connected to this unit by connecting them to the AC
OUTLETS on the rear panel of this unit. Power control may not be synchronized with this unit depending on the component.
For details, refer to the operating instructions liar the connected component.
'2 When the remote control code for your TV is set up liar either DTV or PHONO (see page 103), you can turn on the power of your TV
without selecting an input source. The remote control code set up liar DTV takes priority over the one liar PHONO.
'3 When TUNER is selected as the input source, this unit plays the last station received before the unit was set in the st:mdby mode.
'4 Playback can be started lk_rany YAMAHA remote control-compatible MD recorder, CD player, CD recorder, DVD player, or DVD
recorder. When using macros to operate other components, you will need to program the play button on the input area of that
component (see page 105) or set a remote control code (see page 1{)3).
108 E,