Owner`s manual

Component interlace/progressive up-conversion
CMi:::'i".i"i_ :[.."i:::'
Use this feature to activate or deactivate the analog
interlace/progressive conversion of the analog video
signals input at the composite video, S-video and
component video jacks so that the analog video signals
deinterlaced fi'om 480i (NTSC)/576i (PAL) to 480p/576p
are output at the COMPONENT MONITOR OUT jacks.
Choices: ON, OFF
• Select "ON" to activate the analog interlace/
progressive up-conversion of the analog video signals.
• Select "OFF" to deactivate the analog interlace/
progressive up-conversion of the analog video signals.
_ate_
• This menu item is not avaihtbleand hence not _isible in the
OSD il "V CONV."is set to "OFF".
• 11your video monitor does not support analog *,ideosignals
with481)p/57(ipol resolution, theSET MENU items may not be
disphtyed on your video monitor when "CMPNTI!P"is set to
"ON". Use "V-RESET" in "ADVANCEDSETUP" to set the
"CMPNT l/P" parameter to the lactory preset setting {see
page 119).
HDMI interlace/progressive up-conversion
i..Ji",i','i T T ..'iD
i n./_ la. a. ,' i
Use this feature to activate or deactivate the HDMI
interlace/progressive up-conversion of the analog video
signals input at the composite video, S-video and
component video .jacks so that the analog video signals
deinterlaced fi'om 480i (NTSC)/576i (PAL) to 480p/576p
are output at the HDM1 OUT jack.
Choices: ON, OFF
• Select "ON" to activate the HDMI interlace/
progressive up-conversion of the analog video signals.
• Select "'OFF" to deactivate the HDMI interlace/
progressive up-conversion of the analog video signals.
•This menu item is not availableand hence not visible in the
OSD if "V CONV." is set to "OFF".
• Whenanalog videosignals with 1080ior 720pof resolution arc
up-convertedIo HDMI and output at tile HDMI OUT jack, the
picture quality mayworsen.
Short message display
:!;i..iORi {"iE:!!;:!!!;i::l(!_E
Use this feature to activate or deactivate the short message
display function.
Choices: ON, OFF
• Select "ON" to activate the short message display
function. The contents of the front panel display appear
at the bottom of the screen each time you operate this
unit.
• Select "OFF" to deactivate the short message display
function.
The shortmessage display doesnot appear in the lollo,aing cases:
- x_hentile component videosignals with 481)p/576p,721)p,
1080ior 1080presolutions are input
- When HDMI video signals are input
On-screen display time ,.-,_.._,:::,...._:::,m:::_.._
Use this feature to set the amount of time to display the
XM Satellite Radio infi)rmation or iPod menu in the OSD
after you perform a certain operation.
Choices: ALWAYS, 10SEC, 30SEC
• Select "ALWAYS" to display the OSD unceasingly
during an operation.
• Select "10SEC" to turn off the OSD 10 seconds after
you perform a certain operation.
• Select "3()SEC" to turn off the OSD 30 seconds after
you perform a certain operation.
Front panel display scroll _:::_':::"_:::''"_
Use this feature to set whether to display the information
(such as song title or channel name) in the fi'ont panel
display, in a continuous manner or by the first 14
alphanumeric characters after scrolling all characters once
when "XM" or "DOCK" is selected as the input source.
Choices: CONT, ONCE
• Select "CONT" to display the operation stares in the
fi'ont panel display in a continuous manner.
• Select "ONCE" to display the operation stares in the
fi'ont panel display, by the first 14 alphanumeric
characters after scrolling all characters once.
• Memory guard B::,MEMOR'.,.'(!!iUAR[::,
Use this feature to prevent accidental changes to DSP
program parameter values and other system settings.
Choices: OFF, ON
r " Mr=M=%'==ii m==='i'===r'=r'lI,_=,
>OFF [Ill
[ _/] [> ] ;l:ld,iu:_=i
• Select "'OFF" to turn off the "MEMORY GUARD"
feature.
• Select"ON" to protect:
DSP sound field program parameters
all "SET MENU" items
all speaker levels
When "MEMORY GUARD" is set to "ON", you cannot select
and adjust any other "SET MENU" items.
98 En