Installation guide

M208 Manager
Re:control
2
General
The Configuration Software
The M208-Manager is a PC program with which the
M208 can be programmed based on the wishes and
needs of the enduser.
Additional to the source selection, the downloading of
a new firmware for the processor it is also possible to
make various even more specific configuration while
using the „Advanced functions“ and the „Expert
functions.
In these modes the device configuration can be
changed, Infrared codes can be red and the content of
the M 208 can be copied.
This manual will explain to you in the first part the
basic functions of the M 208 Manager. In the second
part the functions for the advanced users are
described.
M208 Manager installation
After downloading the Software M208 from the Revox
homepage (www.revox.com
) you can unpack the ZIP-
File.
Start the installation with a double click on to the
setup.exe file.
The installation guide will lead you through the
installation process. Revox recommends not to
change the proposed directory names.
M208 Manager already installed?
In case that you do have already an earlier version of
the M 208 installed, please deinstall this SW with one
of the deinstallation tools of Windows.
After the succesfull installation of the M 208 Manager
an icon M208 Project Manager will appear in the Start
directory of Windows.