Technical data

1.736.227 Head Support Block Complete with 2-track Heads
without pinch-roller arm
x x x
1.736.228 Head Support Block Complete with 4-track Heads
without pinch-roller arm
x x x
1.736.229 Head Support Block Complete with 2-track Heads
7.5/15 ips 6/12 pol
01 1.736.226-01 Head Mounting Plate, bare x x x 1 7076
1.736.226 Head Mounting Plate, Complete, without Heads x x x 1
02 1.736.224 Head Support Block Bare (Including 7.5/15 ips 4/8
pol)
x x x 1
02 1.736.225 Head Support Block Bare 7.5/15 ips 6/12 pol x 1
03 1.736.226-02 Slotted Nut (Head Mounting) x x x 3 7052
04 1.736.226-05 Screw (Vertical Adjuster) x x x 6 7054
05 1.736.226-04 Slotted Nut (Vertical Adjuster) x x x 6 7053
06 22.01.8026 Hexagon Nut M 2.6 x x x 6 7057
07 23.01.1032 Washer x x x 6
08 37.01.0101 Spring Washer 3.2/8 x x x 12 7056
09 1.736.226-07 Spacer, Azimuth Adjuster x x x 3 7055
10 1.736.222-01 Head Block Fixing Screw (Screw–On Head Cover) x x 2 7138
10 1.736.222-09 Head Block Fixing Screw (Plug-In Head Cover) x 2 7139
11 1.736.222-07 Tubular Spacer x x x 2
12 1.736.222-04 Tape Guide Cup x x x 4 7133
13 1.736.222-05 Tape Guide Centre Piece, Left x x 1 7136
13 1.736.221 Tape Guide Centre Piece, Left x 1 7137
14 1.736.222-06 Tape Guide Centre Piece, Right (Mech. And Switch) x x 1 7134
14 1.027.114 Tape Guide Centre Piece, Right (Opt. And Switch) x 1 7135
15 1.736.222-08 Tape Guide Post, Left (Ser I + II also right) x x x 2 7037
16 1.736.250 Tape Guide Post, Right (Opt. And Switch) x 1 7038
57.99.0132 Photo resistor ORP 62 x 1 7039
17 1.736.222-03 Threaded bushing x x x 2
18 24.16.1040 Lock Washer M4 x x x 2
19 21.01.0456 Machine Screw M 4x10 x x x 2
20 22.01.8030 Hexagon Nut M 3 x x x 1
21 1.736.232-01 Pin x x x 1
22 1.736.232-03 Guide Washer x x x 2
23 1.736.232-02 Spacer x x x 1
24 22.01.8020 Hexagon Nut M 2 x x x 1
21-24 1.736.232 Tape Guide Pin Complete x x x 1 7058
25 1.020.127 Head Mounting Dise Complete x x x 3 7051
26 27 1.736.226-06 Sheilding Can x x x 2 7049
28 1.736.501-04 Washer x x x 1
29 1.017.240 Erase Head 2-Track (check serial n° of recorder) x x x 1 7043
29 1.017.300 Erase Head 4-Track (check serial n° of recorder) x x x 1 7044
29 1.017.241 Erase Head 2-Track (from n° 69701 up and for n°
60101 – 60700 & 65101 - 68500)
x 1
29 1.017.301 Erase Head 4-Track (from n° 69701 up and for n°
60101 – 60700 & 65101 - 68500)
x 1
30 1.017.360 Recording Head 2-track x x x 1 7045
30 1.017.380 Recording Head 4-track x x x 1 7046
31 1.017.370 Playback Head 2-track x x x 1 7047
31 1.017.390 Playback Head 4-track x x x 1 7048
32 1.736.237-02 Tubular Spacer x 2
33 21.01.0356 Machine Screw M 3x10 x 2
34 22.01.8030 Hexagon Nut M 3 x 2
35 1.736.237-02 Tubular Spacer x 1
36 21.01.0357 Machine Screw M 3x12 x 2
37 1.736.239 Auto-stop Amplifier Complete x 1 7063