Technical data

DVD-Modul MK4
Re:source
7
Video switch principle
A separately available video switch
can be connected to both the SCART
version and the RCA plug version of
the DVD module.
Essentially, the M300/M301 video
switch is a set of external connections
where different video output and
different recording devices can be
connected.
For the SCART version, you need the
M300 video switch and for the RCA
plug version, you need the
M301.
These two versions differ from each
other through the way they are
connected to the DVD module. The
connections for the video devices and
the monitor outputs are the same.
Connecting a video switch adds an
additional 6 video sources (Video 1...6)
to the M51 Source menu.
The M51 takes over the complete
control of the video switch.
The audio signal from the video
sources attached is transmitted by the
M51 whereas the picture signal is
handled by the video devices attached,
such as TV, video projector, etc.
The following two pages give you an
overview of the connection options.
Optional M301 Video switch (RCA plug version)