Technical data
DVD-Modul MK4
Re:source
5
SCART –Assignment M51*
(1)
Audio output (right)
(2)
Audio input (right)
(3)
Audio output (left/ mono)
(4)
Audio earth
(5)
RGB blue or
V
earth
(6)
Audio input (left/ mono)
(7)
RGB
blue
or
V
output
(8)
Switching voltage 12V/ 16:9
(9)
RGB green or
U
earth
(10)
Data cable 1
(11)
RGB
green
or
U
output
(12)
Data cable 2
(13) RGB red earth or S-Video
chrominance earth
(14)
Data cable earth
(15) RGB
red
signal or S-Video
chrominance
(16)
RGB
blanking
signal
(17) FBAS Video earth, S-Video
luminance or
Y
earth
(18)
RGB blanking signal earth
(19) FBAS Video output or
S-Video luminance or
Y
output
(20) FBAS Video input or
S-Video luminance input
(21)
Plug screening (earth)
* Sleeve view
Digital output
The digital audio signal can be taken
from the optical digital output
DIGITAL
OUT using a fibre optic cable. This
connection is often referred as
TOS-
Link. This signal can be used for an
external decoder or for digital
recording devices such as MiniDISC
and DAT players.
With normal audio CDs, you get a
digital stereo signal (SPDIFF).
With DVD replay, there is a 5.1 signal
at the digital output that is only
suitable for decoders.
Unlike analogue music signals, the
digital signal can transmit several
music channels in one cable. For this
reason, only one cable per device is
needed for a stereo or multi-channel
transmission with the
DIGITAL-OUT
output.